Oil & Gas Filter Cartridges

Through decades of experience in the oil and gas industry, we understand that there are many unique needs. Applications and contaminants vary, and we approach every filter cartridge selection differently. We base our solutions on the specific need and collaborate closely with each customer.

Air Filter Cartridges

JonAIR™ P Series Rectangular Style Air Filter Cartridge

JonAIR P Series (JAF) high efficiency pleated panel ölters are manufactured with various media options in heavy duty metal frames. All of them are produced according to the highest quality standards and optimized for the highest performance and lowest energy consumption. These pleated media elements are designed to provide the optimum combination of particle removal efficiency and contaminant holding capability.

JonAIR™ P Series Rectangular Style Air Filter Cartridge

JonAIR™ PRE Series Pre-Filters

The PRE series media panel is a replaceable media designed to reduce replacement costs by extending the service life of panel air ölters. Made from 100% non-woven bonded öbers, the pre-cut pads are engineered for single or multi-ply grades. Available dry or treated with non-toxic, non-migratory, odorless adhesives that are incorporated into the fiber media.            

JonAIR™ PRE Series Pre-Filters

JonAIR™ R Series Round Style Filter Cartridge

JonAIR R Series (JAF) pleated round air filters are designed for high flow capabilities with greater dirt holding capacity and extended service life. Designed for the toughest of operations and are available in various media grades, hardware, adhesives, and gaskets to suit your specific applications.

Jonair R Series

Gas Filter Cartridges - Pleated

GasPleat™ E Series (JPME) Polyester Filter Cartridge

GasPleat E Series pleated synthetic polyester dry gas elements are high efficiency filters specifically designed for the removal of solid particulate contaminates in critical gas applications. Polyester has excellent use in dry gas applications with exceptional dimensional stability and good chemical and abrasion resistance. They are available in various grades of absolute rated high performance polyester media with hardware customizable to suit your application. 

GasPleat™ E Series (JPME) Polyester Filter Cartridge

GasPleat™ P Series (JPMP) Polypropylene Filter Cartridge

GasPleat P Series pleated synthetic polypropylene dry gas elements are high efficiency filters specifically designed for the removal of solid particulate contaminants in critical gas applications. Polypropylene exhibits excellent resistance to acids, alkalis, and hydrolysis. They are available in various grades of absolute rated performance polypropylene media with hardware customizable to suit your application.

gaspleat p series

GasPleat™ K Series Bonded Blended Polycell™ Filter Cartridge

GasPleat K Series bonded blended Polycell filters are designed using our proprietary "K" media blend with consists of bonded polyester and cellulose fibers. This special blend of media provides some of the structural and compatibility advantages of our tier 1 polyester dry gas filter elements at a cost closer to that of an economy level cellulose filter.

GasPleat™ K Series Bonded Blended Polycell™ Filter Cartridge

GasPleat™ C Series (JPMC) Resin Bonded Cellulose FIlter Cartridge

Pleated resin bonded cellulose dry gas filters provide a low cost economical approach to dry gas filtration in non-critical applications. This entry level offering provides increased surface area which allows for maximum dirt holding capacity and lower initial pressure drop.

gaspleat c series

GasPleat™ G Series (JPMG) Micro-Fiberglass Filter Cartridge

GasPleat G Series pleated micro-fiberglass filter elements are high efficiency cartridges specifically designed for the removal of contaminants in critical gas applications. They are available in various grades of absolute rated high performance micro-fiberglass media with hardware customizable to suit your application.

gaspleat g series

GasPleat™ SS Series (JPSS) Metal Filter Cartridge

Pleated metal filter elements are the ultimate in durability and chemical compatibility. These elements can be used in ultra high temperature gas applications and are often backwashed and re-used multiple times before discarded.

GasPleat™ SS Series (JPSS) Metal Filter Cartridge

GasPleat™ HT Series (JPMG) High Temperature Gas Filter Cartridge

GasPleat HT Series high temperature pleated micro-fiberglass filter elements are high efficiency cartridges specifically designed for the removal of contaminants in critical gas applications operating at high temperatures. They are available in various grades of absolute rated high performance micro-fiberglass media with tinned carbon steel or high temperature stainless steel hardware.

Oil and Gas - GasPleat HT Series

GasPleat™ SE Series (JSE) Sewn-End Filter Cartridge

GasPleat SE Series sewn-end radial fin gas filter elements are designed to replace any manufacture's elements of this design in particulate removal from a gas stream. A wide selection of media is available including: cotton, rayon, polyester, polypropylene, nylon, Teflon®, Nomex®, and fiberglass to suit any application.

GasPleat SE Series

GasPleat™ ME Series (JME) Molded-End Filter Cartridges

Jonell molded-end pleated filter elements are designed to replace any manufacturer's elements of this design in gas service. The GasPleat ME Series filters are molded from high quality plastisol that seals the ends of the elements while acting as a gasket against the sealing plates in the filter housing. A wide selection of media is available including cotton, rayon, polyester, polypropylene, nylon, Teflon®, Nomex®, and fiberglass. 

GasPleat™ ME Series (JME) Molded-End Filter Cartridges

GasPleat™ Quick-Change Series

The Quick-Change series has been designed as an extension to the Jonell Systems GasPleatTM product line. The GasPleatTM cartridges are designed to remove rigid contaminants from dry natural gas streams. 

 

Jonell Systems Quick-Change toolless cartridges are built to reduce maintenance downtime with design features like rounded end caps, wide handle grip, high durometer chevron gasket for a positive seal to avoid bypass and effective contaminant removal.

 

These are replacements for PECO EZ-Align* Series cartridges for the Titan-Purasep* series housings, these cartridges can be easily installed without indexing reducing downtime.

gas pleat cartridges

Gas Filter Cartridges - Depth

Depth-LOK™  Series (JFG) Fiberglass Filter Cartridge

The Depth-LOK Series fiberglass gas filters are gradient depth style filter/separator elements. They are designed for the removal of fine solids from a gas stream, as well as, coalescing liquids for easier removal. The Depth-LOK Series is one of the most popular industry filters and is regarded as an industry work horse.

depth-lok jfg cartridge

Depth-LOK™ XTR Series (JMG) Micro-Fiberglass Filter Cartridge

Depth-LOK XTR Series fine micro-fiberglass filters are designed for the removal of ultra-fine 0.3 micron particles such as iron sulfides (FeS) from a gas stream, as well as, coalescing liquids for easier removal. When an absolute 0.3 micron rating is required in an depth style option, the Depth-LOK XTR Series is field tested and proven to do the job.

Depth-LOK™ XTR Series (JMG) Micro-Fiberglass Filter Cartridge

Depth-LOK™ HT Series High Temperature Filter Cartridge

Depth-LOK HT Series high temperature elements are specifically designed for ultra-high temperature gas filtration. By using a depth matrix of heat treated Pyrex glass fibers with high quality stainless steel hardware and high temperature gaskets, the Depth-LOK HT elements can be safely operated in high temperature applications.

Depth-LOK™ HT Series High Temperature Filter Cartridge

Tri-DEP™ Series Gradient Depth Filter Cartridge

Tri-DEP Series filters are our latest innovation in improved depth style filtration. Tri-DEP media uses synthetic filaments of trilobal shape cross sections providing a larger surface area per fiber and cubic unit of media than traditional circular fibers resulting in extremely high collection efficiencies. Tri-DEP media is available in polyester and polypropylene and are among the most chemically compatible materials utilized in the Oil & Gas Industry.

Tri-DEP™ Series Gradient Depth Filter Cartridge

Tri-DEP™ XTR Series Gradient Depth Filter Cartridge

Tri-DEP XTR Series filters have the same superior qualities as our standard Tri-DEP Series filters, but are designed for removal of ultra-fine particles from a gas stream such as shear sensitive iron sulfides and iron oxides, as well as, coalescing entrained liquids for easier removal. These highly efficient filters are available in both polyester and polypropylene media.

Tri-DEP™ XTR Series Gradient Depth Filter Cartridge

Depth-LOK Quick-Change Series

The Quick-Change series has been designed as an extension to the Jonell Systems Depth-LOKTM product line. The Depth-LOKTM cartridges are designed to provide the optimum combination of solid contaminant holding and liquid contaminant pre-coalescing capability.

 

Jonell Systems Quick-Change toolless cartridges are built to reduce maintenance downtime with design features like rounded end caps, wide handle grip, high durometer chevron gasket for a positive seal to avoid bypass and effective contaminant removal.

 

These are replacements for PECO EZ-Align* Series cartridges for the Titan-Purasep* series housings, these cartridges can be easily installed without indexing reducing downtime.

depth-lok quick change series

Gas Coalescing Cartridges

Micro-LOK™ JOS Series (JOS) Pleated Coalescing Filter Cartridge

Micro-LOK JOS Series air/oil separator coalescing pleated elements are designed to coalesce extremely fine liquid particles down to 0.3 microns from a gas stream. Most commonly used to remove lubricating oil aerosols in a compressor discharge.

Micro-LOK™ JOS Series (JOS) Pleated Coalescing Filter Cartridge

Micro-LOK™ G Series (JPMG) Pleated Coalescing Filter Cartridge

Designed for the removal of entrained low surface tension mist and aerosols, the Micro-LOK G Series pleated depth vapor phase coalescing filter is an industry work horse in reverse flow coalescing. Available in hundreds of configurations and sealing types; you can trust the Micro-LOK G Series when an absolute 0.3 micron efficiency in critical.

micro-lok g series

Micro-DEP™ E Series (JGC) Depth Style Vapor Phase Coalescing Filter Cartridge

Micro-DEP E Series is a depth style polyester vapor phase coalescing filter designed for reverse flow removal of entrained low surface tension mists and aerosols. By utilizing various media recipes of our Tri-DEP trilobal media technology, Micro-DEP E series elements are designed to efficiently remove liquid contaminants in a wide range of challenging applications.

Micro-DEP™ E Series (JGC)

Micro-DEP™ G Series (JMG) Ultra-Fine Depth Style Vapor Phase Coalescing Cartridge

Micro-DEP G Series ultra-fine depth style micro-fiberglass coalescing elements are reverse flow elements designed for the removal of entrained low surface tension mists and aerosols. When an absolute 0.3 micron efficiency is critical, you can trust Micron-DEP G Series. 

Micro-DEP™ G Series (JMG)

Twist-LOK™ Series (JGCP / JGCC) Versatile Phase Separation Filters

Twist-LOK Filter's versatile separation system offers superior contaminant removal and coalescing efficiency with the added feature of our patent pending Twist-LOK locking mechanism allowing the ability to customize filter and coalescer cartridges, as needed, to suit specific operating conditions. Designed to remove liquid and solid contaminants from natural and process gas, the assembled cartridge provides both a first stage "outside-to-inside" flow direction filter element and a second stage "inside-to-outside" coalescer element.

 

Twist-LOK™ Brochure

twist-lok brochure

Download

 

Twist-LOK™ Data Sheet

twist-lok data sheet

Download

Twist-LOK Series (JGCP-JGCC)

JPEX™ Series Conical Style Coalescing Cartridge

JPEX™ Series conical style elements coalesce extremely fine liquid particles from natural gas, such as lubricating oil downstream of a compressor. The flow pattern through the element is from the "inside-to-outside, reducing the gas velocity as the droplets are being removed. JPEX Series elements are used in chemical plants, compressor stations, pipelines, and other industrial facilities for the removal of water, lube oils, and other liquid contaminants. from natural gas. JPEX Series elements are available in various grades of high performance micro-fiberglass with hardware to suit specific applications.

JPEX Series Conical Style Coalescing Cartridge

Liquid Filter Cartridges - Pleated Style

LiquiPleat™ A Series (JMPA) Cotton Filter Cartridge

LiquiPleat A Series cotton filters are used in specialized applications, such as gas sweetening procedures that require removal of organic and inorganic solids from amine systems. Our LiquiPleat A Series filters provides increase efficiency and surface area over traditional cotton string wound filter technologies while maintaining the temperature and compatibility characteristics of cotton media.

liquipleat a series

LiquiPleat™ E Series (JPME) Polyester Synthetic Filter Cartridge

LiquiPleat E Series polyester filters are pleated "outside-to-inside" flow direction elements designed for applications with large flow and contaminant requirements. LiquiPleat E Series filters are available in various grades a nd configurations of high performance polyester and hardware to suit your application.

LiquiPleat™ E Series (JPME)

LiquiPleat™ P Series (JPMP) Polypropylene Synthetic Filter Cartridge

LiquiPleat P Series polypropylene filters are pleated liquid filtration elements designed for applications with large flow and contaminant requirements. LiquiPleat P Series synthetic filters are available in various grades of and configurations of high performance polypropylene with hardware to suit your application.

LiquiPleat P Series

LiquiPleat™ C Series (JPMC) Resin Bonded Cellulose Filter Cartridge

LiquiPleat C Series resin bonded cellulose filters are an economical choice for applications such as glycol filtration and lubricating oil where nominal filtration is desired. This entry level offering provides increased surface area, allowing for maximum dirt holding capacity and initial pressure drop.  

LiquiPleat C Series

LiquiPleat™ K Series (JPMK) PolycellTM Media Filter Cartridge

LiquiPleat K media hybrid filter elements are designed using our proprietary K media blend consisting of bonded polyester and cellulose fibers. This special blend of media provides some of the structural and compatibility advantages of tier one polyester liquid filter elements at a cost closer to that of an economy level cellulose filter.

LiquiPleat™ K Series (JPMK)

LiquiPleat™ SS Series (JPSS) Metallic Filter Cartridge

Pleated metal liquid filters are the ultimate in durability and chemical compatibility. These elements can be used in ultra-high temperature applications and are often backwashed and re-used multiple times before discarding.

LiquiPleat™  SS Series (JPSS)

LiquiPleat™ SE Series (JSE) Sewn-End Filter Cartridge

LiquiPleat SE Series filters are designed to replace any manufacturer's elements of this design in particle removal from a liquid stream. To suit any application, a wide range of media is available including: cotton, rayon, polyester, polypropylene, nylon, Teflon®, Nomex®, and fiberglass.

LiquiPleat SE Series (JSE)

LiquiPleat™ ME Series (JME) Molded-End Filter Cartridge

LiquiPleat ME Series filter elements are molded from highly quality plastisol that seals the ends of the elements while acting as a gasket against the sealing plates in the filter housing. A wide selection of media is available, including: cotton, rayon, polyester, polypropylene, nylon, Teflon®, Nomex®, and fiberglass.

LiquiPleat™  ME Series (JME)  Molded-End Filter Cartridge

LiquiPleat™ H Series (JH) Hydraulic Filter Cartridge

LiquiPleat H Series hydraulic filters are heavy duty; high collapse pressure elements designed for use in hydraulic service and are inert to most aromatic compounds. Available in various grades and configurations of high performance media with hardware to suit your specific application. 

LiquiPleat™  H Series (JH) Hydraulic Filter Cartridge

LiquiPleat™ HF Series (JHF) High Flow Filter Cartridge

LiquiPleat HF Series elements are large diameter, high efficiency, inside-to-outside flow liquid filters designed for applications with large flow requirements. Available in various grades of absolute rated, high performance micro-fiberglass, polyester, and polypropylene media with hardware to suit your specific application. The large surface area pleated media cartridges are designed to provide the optimum combination of particle removal efficiency and contaminant holding capacity.

LiquiPleat™  HF Series (JHF) High Flow Filter Cartridge

LiquiPleat™ HF XTR Series (JHFO) High Flow Filter Cartridge

LiquiPleat HF XTR Series filters are large diameter elements designed for ultra-high flow applications. These high efficiency elements are designed with a double O-ring sealing system for high liquid flow "in-to-out" and "out-to-in" direction requirements. Available in various grades of absolute rated high performance micro-fiberglass, polyester, and polypropylene media to suit your specific application.

LiquiPleat™  HF XTR Series (JHFO)

Liquid Filter Cartridges - Depth Style

FluiSock™  Series (JB) Rolled Sock Filter Cartridge

FluiSock Series elements are rolled style filters manufactured using specific blends of media designed for a range of applications in the petroleum industry. Our FluiSock Series in one of the oldest, most economical, and most trusted filtration technology in the Oil & Gas Industry. ResDEPTM Series (JRB) Bonded Filter Elements
ResDEP Series resin bonded filters elements have a unique proprietary two-stage filtration design to maximize particle retention and service life in viscous fluid filtration applications. An outer spiral pre-filter wrap, made from a blend of polyester and acrylic fibers, increases cartridge strength and eliminates residual debris associated with conventional or machined grooved resin bonded cartridges.

FluiSock™  Series (JB) Rolled Sock Filter Cartridge

ResDEP™ Series (JRB) Bonded Filter Cartridge

ResDEP Series resin bonded filters elements have a unique proprietary two-stage filtration design to maximize particle retention and service life in viscous fluid filtration applications. An outer spiral pre-filter wrap, made from a blend of polyester and acrylic fibers, increases cartridge strength and eliminates residual debris associated with conventional or machined grooved resin bonded cartridges.

ResDEP™ Series (JRB) Bonded Filter Cartridge

ToughWound™ Series (JJ) String Wound Filter Cartridge

ToughWound Series string wounded elements are a low cost nominal filtration technology which is very effective for use in a variety of contaminants from water, vegetable oils, beverages, and other fluids. String wound elements are among the most common type of liquid filters in the world today.

ToughWound™ Series (JJ) String Wound Filter Cartridge

JMB Series™ (JMB) Melt Blown Filter Cartridge

JMB Series melt blown filter elements are made of polypropylene resin using no binders, lubricants, or anti-static agents in our manufacturing process. JMB Series polypropylene filters have been tested and certified under ANSI/NSF Standard 42 for material requirements only. The inert polypropylene resin provides exceptional chemical compatibility to handle a wide range of process fluids.

JMB Series™ (JMB) Melt Blown Filter Cartridge

BiDEP™ Series (JBC) High Efficiency Synthetic Bi-Component Filter Cartridge

The BiDEP Series rigid filter cartridges are made of high efficiency, thermally bonded, bi-component fibers. The unique fiber-to-fiber bond forms a three dimensional fiber network that offers a high tolerance to differential pressures. This feature also prevents changes in the fiber matrix throughout the life of the fiber allowing for precise filtration and eliminating filter unloading.

BiDEP™ Series (JBC) High Efficiency Synthetic Bi-Component Filter Cartridge

JHFPD Series Large Diameter Coreless Polypropylene Depth Cartridge

Our JHFPD Series large diameter coreless polypropylene depth cartridges deliver cost-effective performance at low pressure drop in liquid base applications with high flow rates. These highly efficient "inside-to-outside" flow elements are constructed of polypropylene depth media providing high particle removal efficiency and a broad range of chemical compatibility. The coreless design reduces installation procedures and disposal costs. JHFPD Series cartridges excel at capturing solid and semi-solid particulates with the filter media delivering reliable cost-effective filtration. In addition the large diameter design can process high flow rates with fewer elements, allowing you to use fewer cartridges per housing. This can significantly reduce downtime during element replacement. JHFPD Series cartridges are offered in 6 inch diameter with standard lengths of 10, 20, 30, 40, and 60 inches.

JHFPD Series Large Diameter Coreless Polypropylene Depth Cartridge

JPD™ 3862 Series Polypropylene Depth Style Cartridge

Our JPD™ 3862 Series elements are large particulate holding, highly efficient, liquid filtration elements specifically designed for applications with high amounts of solid contaminants. They are available in various grades of absolute rated high performance polypropylene media to suit your application. These large diameter, depth style cartridges are designed to provide the optimum combination of particle removal efficiency and contaminant holding capability. The JPD™ 3862 Series is a depth style technology supported with thermally bonded polypropylene end caps. The “outside-to-inside” gradient flow design allows particles to penetrate the filter media capturing contaminants throughout the depth of the medium. Larger particles are captured near the surface while smaller particles are trapped throughout the inner layers of the cartridge. These cartridges excel at capturing solid and semi-solid contaminants within the filter media delivering reliable cost-effective filtration.

JPD™ 3862 Series Polypropylene Depth Style Cartridge

Bag Filters

JBAG™ Series Bag Filter Elements

Leading our economy class filters, Jonell JBAG Series synthetic bag style filters can reduce total filtration costs. JBAG Series filters have a service life up to four times longer than conventional bag filters. Available in polypropylene and polyester, as well as, other media for special applications.

JBAG™ Series Bag Filter Elements

JXC™ Series (JXC) Pleated Bag Filter Replacements

JXC Series elements are high efficiency, "inside-to-outside" flow, pleated liquid filtration bag replacement cartridges designed for applications with high flow requirements. By significantly increasing the surface area in original baskets, incorporating multiple layers of media, and adding a true gasket seal; our unique pleated bag design provides increase efficiency, for longer life, and superior dirt holding capacity compared to a standard bag design.

JXC Series (JXC) Pleated Bag Filter Replacements

JDP Series

JPD Series large diameter coreless depth cartridges deliver cost effective performance at low pressure drop in liquid base applications with high flow rates.  These are well suited to mid-steam applications in oil and gas industry to capture solid and semi solid particulates within the filter media to deliver reliable, cost effective filtration. 

These highly efficient inside to outside flow elements are constructed of polypropylene depth media providing high particle removal efficiency and a broad range of chemical compatibility.  The coreless design reduces installation procedures and disposal costs.

These depth cartridges work extremely well where the feed has large amounts of solid contaminants. Our innovative design builds a cake that continues to capture particulate matter and dirt as the process operates while standard surface area filtration cartridges will need to be changed out much more often.

 

JDP Series Data Sheet


pdf icon  Download

JDP Series

JPLX Series Conical Pleated Bag Filter Replacement

Jonell Systems JPLX series are coreless cartridges with inside to out flow, designed for a wide range of applications including particulate removal from water and amine applications. The cartridge is pleated with an epoxy coated screen improving structural integrity from installation to removal. Ideal for solid-liquid separation, this coreless cartridge delivers effective single pass filtration for batch and drumming applications.

 

JPLX Series Data Sheet


pdf icon  Download

JPLX Series

Activated Carbon Filtration

CarboPur™ R Series (JRF) Radial Flow Activated Carbon Canisters

CarboPur R Series radial flow activated carbon canisters present a greater surface area allowing process liquid to flow from the outside through virgin activated carbon at a lower velocity. Hydrocarbon contaminants are removed by carbon adsorption from the fluid before exiting the core. CarboPur R Series canisters allow for easier and cleaner replacement of activated carbon.

carbopur

CarboPur™ V Series (JVF) Longitudinal Flow Activated Carbon Canisters

CarboPur V Series vertical flow activated carbon canisters are designed to maximize carbon utilization allowing for the highest amount of surface area versus volume available. As a result, the process liquid has 30% more carbon contact as it flows through the canister.

CarboPur

CarboPur™ Bulk Activated Carbon

CarboPUR Bulk Carbon is specially selected to maximize performance in gas processing application where the target contaminant is long chain hydrocarbon molecules. Used in all our carbon canisters, our activated carbon is also available in bulk form, small easily managed bags, and large super sacks.

carbopur bulk

ClayPur™ Series (JFE) Fuller's Earth Canisters

ClayPur Series Fuller's Earth Canisters are designed for use in de-colorization and removing surfactants from light hydrocarbon liquids. These canisters absorb polar compounds, color bodies, and inorganic contaminants from refined fluids, such as diesel, jet fuels, propane, etc. Our Fuller's earth canisters help eliminate discarded fuel runs and will quickly repay their costs.

ClayPur™ Series (JFE) Fuller's Earth Canisters

Liquid/Liquid Coalescing & Separation Cartridges

Phase-LOK™ S Series (JS) Pleated Silicone Impregnated Cellulose Separator

Phase-LOK S Series pleated separator elements incorporate specially treated silicone impregnated cellulose to produce a hydrophobic media that repels water while allowing hydrocarbons to pass through. Due to the filtration level achieved in the coalescer stage, Phase-LOK S Series cartridges rarely foul with solids and typically require replacement only every second or third coalescer change to a maximum service life of one year.  

Phase-LOK™ S Series (JS) Pleated Silicone Impregnated Cellulose Separator

Phase-LOK™ T Series Teflon® Phase Separator Filter Cartridge

Phase-LOK T Series phase separator elements are constructed of Teflon® coated stainless steel screen. Phase-LOK T Series' hydrophobic Teflon media repels water while allowing hydrocarbons to pass through. Due to the filtration level achieved in the coalescer stage, T Series elements rarely foul with solid contaminants, can withstand a wide pH range, and are highly compatible in most applications.

Phase-LOK™ T Series Teflon® Phase Separator Filter Cartridge

PhasePUR™ G Series (JC) Fiberglass Coalescing Filter Cartridge

PhasePUR G Series fiberglass phase coalescing filters are designed to coalesce two immiscible liquid phases within a stream to aid separation. In addition to coalescing, G Series cartridges are also highly efficient particulate filters. To safeguard against solids, G Series elements should always be protected by a pre-filter. In installations where no pre-filter exists, the G Series uses an additional pleated section on the upstream side of the coalescer media to extend the effective operating life and protect the coalescing media.

PhasePUR G Series

PhasePUR™ E Series (JEB) Synthetic Phase Coalescing Filter Cartridge

PhasePUR E Series synthetic liquid/liquid coalescing filters were developed for applications where glass media is not compatible. Utilizing our Tri-DEPTM synthetic coalescing media, these filters are designed to remove water from fuels, lube oils, condensates, and other hydrocarbons. 

PhasePUR™ E Series (JEB) Synthetic Phase Coalescing Filter Cartridge

JPAKS™ Series Depth Style Phase Coalescing Wafer Packs

JPAKS Series liquid coalescing wafer packs are designed in various materials and media densities specifically engineered for the separation of immiscible liquids. Through controlled fiber sizes and carefully distributed media densities, Our JPAKS provide maximum coalescing surface area to ensure the optimum fluid contact time prior to gravitational phase separation of coalesced fluids.

JPAKS™ Series Depth Style Phase Coalescing Wafer Packs

HydroSorb™ Series (JPMWA) Water Absorption Filters

HydroSorb Series water absorption elements filter solid particulates and absorb water from petroleum based fluids. Solid particulates are removed by pleated cellulose filter media which is bonded with water absorbing  hydrophilic media.

HydroSorb™ Series (JPMWA) Water Absorption Filters

Contact us

Process Technologies has joined the world’s fastest growing filtration solutions company, Filtration Group. We are global leaders in providing innovative filtration systems and solutions to more than 30 industries. Aviation, Marine Technology, Oil & Gas, and Refineries & Petrochemicals are some of the markets we serve.

 

 

Contact Us