Aviation Filter Housings

For decades, our engineers have researched, designed and developed filter cartridges with increasing expansive ranges of applications. Our cartridge housings meet, or exceed, environmental and cleanliness standards required of all aviation fuels. We offer on-site filter testing labs and services, process and tech support for our extensive applications. We are committed to delivering solutions that are specifically designed for each customer’s needs.

Aviation Microfilters

Microfilter Housings - Model M

  • Vertical & horizontal configurations available
  • Designed to remove solids such as rust, dirt, pipe scale, sand and metal from fuel in a single pass through the filter
  • Easy service and reduced maintenance costs
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or "CE" marked
Model M Filter Housing

SuperFlex™ Microfilter Housings - Model MS

  • Small, economical, carbon steel housings designed for in-line removal of solids
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
SuperFlex Microfilter Housings - Model MS

Fuel-Gard® Housings - Model VF-21SB / 22SB

  • NEW DESIGN. Quick open swing bolt type closer
  • New optional mounting brackets for installation
  • Micron ratings of 2, 5, 10 & 25
Fuel-Gard Housings - Model VF-21SB_22SB

Clay Treaters

Clay Treater Housing - Model F

  • Removes surface active agents (surfactants), color and additives from jet fuel
  • No internal moving parts  
  • Removable cartridge mounting post
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or "CE" marked
clay treater housing - model f

SuperFlex™ Clay Treater - Model FS

  • Can be used as clay treaters, but at lower flow rates than our standard Model F housings
  • Flow rates from 7 to 14 gpm (26 to 52 lpm)
  • Welded carbon steel construction (other materials available)
SuperFlex Clay Treater - Model FS

Aviation Single Stage Coalescers

Single-Stage Coalescer - Model HP

  • Designed to remove gross amounts of water and solids from hydrocarbons
  • No internal moving parts, reducing maintenance costs
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or "CE" marked
Single-Stage Coalescer - Model HP

Aviation Filter Water Separator

Filter Water Separators - Models VCS & HCS (Category C or M)

  • Vertical & horizontal configurations available
  • Designed to filter solids and separate water from fuels
  • Easy service and reduced maintenance costs
  • Qualified to 6th Edition of EI 1581, Category M & M100, Type S
  • EI 1596 Design & Construction
  • Built to ASME Code, Section VIII, stamped and certified or "CE" marked
Filter Water Separators - Models VCS & HCS (Category C or M)

SuperFlex™ - Model VCS

  • 6th edition of 1581
  • Small, economical, carbon steel housings
  • Removes water and solids from many types of fuel
  • Designed for 150 psi (10.5 kg/cm²) @ 250ºF (121ºC)
SuperFlex™ - Model VCS

Fuel-Gard® Housings - Model VF-21SB / 22SB for Aviation

  • NEW DESIGN Quick open swing bolt type closer
  • New optional mounting brackets for installation
  • Micron ratings of 2, 5, 10 & 25
Fuel-Gard® Housings - Model VF-21SB / 22SB