Oil Water Separators

Separator systems must meet regulatory requirements, be easy to install while being cost-effective. We achieve this with our patented products and technology. We partner with our customers to develop units that are specifically suited to their unique needs. Our Bilge and Oil/Water Separators treat hydrocarbon water and include our MPak®Double-Corrugated Coalescent Plates technology.

Bilge Water Separators

CPS 3.2E + EMB for Submarines

  • Supplied ready to install, coming complete with pumps, valves and control panel
  • No mobile components (with the exception of the pumps and pneumatic valves)
  • Level control is fixed and has no float
CPS 3.2E + EMB SUBMARINES

CPS 3.2E + EMB

  • Homologated for a flow rate of 0.73 m³/h (3.2 gpm)
  • Supplied ready to install, complete with pumps, valves and control panel
  • No mobile components (with the exception of the pumps and pneumatic valves)
  • Level control is fixed and has no float
CPS 3.2E + EMB

CPS 10B MKIII + EMB

  • Homologated for a flow rate of 2.5 m³/h (11 gpm)
  • Supplied ready to install, coming complete with pumps, valves and control panel
  • No mobile components (with the exception of the pumps and pneumatic valves)
  • Level control is fixed and has no float
CPS 10B MKIII + EMB

CPS B MKIII + EBM 14x

  • Flow rates range goes from 0.5 m³/h (2.2 gpm) up to 10 m³/h (44 gpm)
  • Supplied ready to install, coming complete with pumps, valves and control panel
  • No mobile components (with the exception of the pumps and pneumatic valves)
  • Level control is fixed and has no float
CPS B MKIII + EBM 14x

CPS 3.2E + EBM 14x1

  • Approved for a flow rate of 0.73 m³/h (3.2 gpm)
  • Supplied ready to install, coming complete with pumps, valves and control panel
  • No mobile components (with the exception of the pumps and pneumatic valves)
  • Level control is fixed and has no float
CPS 3.2E + EBM 14x1

MAS Series

Model MAS - Steel Construction

  • Class I Separators accordance with EN-858, effluent less than 5 ppm
  • Access covers for easy adjustment of oil skimmers
  • Epoxy coating interior and exterior
  • MPak® plate packs: frame in steel and plastic hardware media is oleophilic polypropylene
  • Plate packs clean in place -no need to remove from unit
  • ¾", ¼" or ½" MPak® coalescing plate spacing
  • Solids collection connections built into all units
  • Computerized effluent predictions for accurate sizing
  • Safety closure device in the outlet
Model MAS - Steel Construction

Model MAS - Concrete Construction

  • Class I Separators accordance with EN-858, effluent less than 5 ppm
  • Outlet security device
  • Access covers Class C250 accordance with EN-124
  • MPak® plate packs: frame in steel and plastic hardware media is oleophilic polypropylene
  • Plate packs are clean in place - no need to remove from unit
  • ¾", ¼" or ½" MPak® coalescing plate spacing
  • Computerized effluent predictions for accurate sizing
Model MAS - Concrete Construction

Model MAS - GFRP Construction

  • Class 1 Separators, according EN-858, effluent less than 5 ppm
  • Safety closure device in the outlet
  • MPak® plat packs
  • 3/4", 1/4" or 1/2" MPak® coalescing plate spacing
  • Computerized effluent predictions for accurate sizing
  • Solids removal connection with cover
  • Vent connection
  • Oil removal through manhole
Model MAS - GFRP Construction

Model MCP

Versatile, compact, high efficiency units designed for small flow rates.

Model MCP

Model MPP - Polypropylene Construction

  • New lightweight and portable housings
  • Adjustable water outlets
  • Corrosion resistant
Model MPP

Rainwater Run-Off Separators

These separators can be used for gravitational flow applications and for applications where a pump is required. Once separated out, the solids remain in the separator and are not washed out of the overflow by the next shower of rain. This makes a flow limiter unnecessary and allows the separator to also work when the flow rate is higher.

Rainwater Run-Off Separators

Technology

MPak Cleaning Wands

Our MPak® plates are designed to be cleaned in place using a special cleaning wand.

 

MPak Cleaning Wand

MPak Coalescing Plates

 

Our high-performance MPak® Coalescing Plates provide superior performance in real-world environmental clean-up.

mpak

UTS+UTR

Model UTS

  • Universal conic suction connection
  • 15m of 1 1/2" non collapsible, hydrocarbons proof, suction hose
  • Isolation valves at both suction and discharge
  • Vandal proof cabin in stainless steel which assures no corrosion
  • Electrical control panel with start/stop leds, switches and vacuostat
Model UTS