Marine Filter Cartridges

The marine industry experiences unique demands due to the range of contaminants that result from the salt and seaborne elements. We partner with our customers to understand each challenge and provide solutions that meet each need, whether is onshore, offshore or onboard.

Solids Removal

  • CF 6Carbon steel structural components
  • Maximum differential pressure: 75 psi (5.25 kg/cm²)
  • Retention ratings available in 2, 10 & 25 microns
  • M Series High Efficiency Pleated Paper Filter CartridgesHigh efficiency pleated paper filter cartridges
  • Micron ratings from 0.5 to 75
  • 6” (152.4mm) outside diameter, one piece cartridges available in four nominal lengths
  • No special kits needed to install
  • model mgFacet’s Model MG glass fiber depth filter cartridges are for removing colloidal, slimy or sludge type solids 10 micron and larger or where compatibility problems exist with cellulose media. The cartridges are 6” (152 mm) OD, 3 ½” (89 mm) ID and 14 ½” (368 mm) long.
  • Glass fiber depth filter cartridges
  • Micron rating 10
  • 6” (152.4mm) outside diameter, one piece cartridges available in three nominal lengths

Coalescer

  • VF Housing CC-21_CC-22Recommended maximum operating temperature: 180°F (82°C)
  • Maximum differential pressure: 75 psi (5.25 kg/cm²)
  • pH range from 5 to 9
  • CAA seriesMulti-layered media for increased solids holding capacity
  • Removes water down to less than 5 ppm
  • Self-centering rod mount or screw base
  • CB,CC,CIC & CR SeriesMulti-layered media for increased solids holding capacity
  • Solids removal: 5 micron
  • Water removal down to 10 ppm
  • CB,CC,CIC & CR SeriesMulti-layered media for increased solids holding capacity
  • Solids removal: 25 micron
  • Water removal down to 40 ppm
  • CB,CC,CIC & CR SeriesMulti-layered media for increased solids holding capacity
  • Solids removal: 2 micron
  • Removes water down to less than 5 ppm
  • Ultra-fine solids removal
  • Maximum water coalescence
  • EB SeriesSolids removal: 15 micron nominal
  • Removes oil down to 5 ppm
  • Self-centering rod mount
  • Superflex CC-23-27 and CC-23 SeriesHigher efficiency and longer service life = lower operating costs
  • High efficiency cartridge provides superior solids holding capacity
  • Available in 0.5, 1, 2, 5, 10, 15, 25, 40 and 75 micron ratings

Separator

  • Models CS-94_CS94-C_CS-98-2Provides two-stage coalescing and separation
  • Recommended maximum operating temperature: 240°F (115.6°C)
  • Maximum differential pressure: 75 psi (5.25 kg/cm²)
  • SS SeriesSuperior water repelling characteristics over Teflon® and paper
  • More resistant to surfactants
  • Cleanable and reusable
  • Maximum recommended operating temperature: 240°F (115°C)
  • pH range from 5 to 9
  • Designed for balanced flow through cartridge
  • Flow direction: outside to in
  • ST SeriesCleanable and reusable
  • Synthetic mesh 50 micron
  • Designed for balanced flow through cartridge
  • Treated metal components for corrosion protectionModel SS
  • Superior water repelling characteristics over Teflon® and paper
  • More resistant to surfactants
  • Cleanable and reusable
  • Maximum recommended operating temperature: 240°F (115°C)
  • pH range from 5 to 9
  • Designed for balanced flow through cartridge
  • Flow direction: outside to in